Each 5100 Call Server can support up to 500 IP or analogue phone extensions and is supplied with an initial 4 voicemail ports and 1,500 hours of voicemail storage. Basic single-level Auto Attendant is also included.

Constructed on a Linux platform using LDAP database technology, the 5100 Call Server module is the foundation of the Maximiser phone system, hosting all call routing capabilities, voice processing, a SIP Proxy Server, H.323 Gateway & GateKeeper and integral Apache Web Server.

Supplied with an initial capability to support up to 8 analogue extensions, the 5100 Call Server unit can support 8 further analogue telephones and four directly connected IP Phones. More telephones are supported through the addition of LAN switches (for VoIP phones) and Phone Modules (for analogue phones).

Supplied as standard with 4 Basic Rate ISDN telephone lines, trunk capacity can be expanded via two further Basic Rate interfaces, dual Primary Rate ISDN (PRI)/DPNSS, SIP and H.323 IP Trunks.

In scenarios where support for more than 500 users is required, multiple 5100s can be linked together via the IP LAN or WAN to provided a single seamless system for up to 10,000 users.
Splicecom Maximiser Brochure pdf

SpliceCom's Maximiser Unified Communications platform combines voice, video, IP TV and web-enabled applications from a single system to all types of business, irrespective of size.

The maximiser 5100 system processor unit supports up to 16 analogue telephones. When this requirement is exceeded, the maximiser phone modules cater for extra analogue devices.

The 5315 phone module provides connectivity for up to 15 analogue extensions and four IP Phones with Power over Ethernet (PoE).

Connectivity to the 5100 Call Server is achieved directly (same comms cabinet) or indirectly via the LAN or an IP WAN link for remote sites / buildings.

In addition, a USB interface is provided, allowing an external WiFI adapter to be fitted in scenarios where wireless connectivity to the Call Server is required.

Full Splicecom business phone system installation and project management service available.

Call 0845 634 4008 or email sales@southern-comms.co.uk

The 5315 Phone Module allows for the addition of a further 15 analogue telephone extensions.

The maximiser 5100 system processor unit supports up to 16 analogue telephones. When this requirement is exceeded, the maximiser phone modules cater for extra analogue devices.

The 5330 phone module provides connectivity for up to 30 analogue extensions and four IP Phones with Power over Ethernet (PoE).

Connectivity to the 5100 Call Server is achieved directly (same comms cabinet) or indirectly via the LAN or an IP WAN link for remote sites / buildings.

In addition, a USB interface is provided, allowing an external WiFI adapter to be fitted in scenarios where wireless connectivity to the Call Server is required.

Full Splicecom business phone system installation and project management service available.

Call 0845 634 4008 or email sales@southern-comms.co.uk

The 5330 Phone Module allows for the addition of a further 15 analogue telephone extensions.

The PCS 580 advanced touch-screen VoIP telephone is Splicecom's latest state-of-the-art telephone.

Full Splicecom business phone system installation and project management service available.

Call 0845 634 4008
or email sales@southern-comms.co.uk

View more PCS Phone Video Presentations

PCS 560 & 570 Brodchure pdf

Full Splicecom business phone system installation and project management service available.
Call 0845 634 4008 or email sales@southern-comms.co.uk

SpliceCom's PCS 570 offers 18 context sensitive keys around its full colour graphics display. The PCS 570 offers a wide range of productivity enhancing applications and services including favourites (offering Key & Lamp simulation), mobility control, unified directories, personal call history logs, mMessage retrieval & playback, call recording, personal settings

The PCS 570 is a fully-switched VoIP telephone.

SpliceCom's PCS 560 offers nine context sensitive keys around its full colour graphics display. The PCS 560 offers a wide range of productivity enhancing applications and services including favourites (offering Key & Lamp simulation), mobility control, unified directories, personal call history logs, mMessage retrieval & playback, call recording, personal settings

The PCS 560 is a fully-switched VoIP telephone.

Splicecom Telephone Handsets Brochure pdf

Full Splicecom business phone system installation and project management service available.
Call 0845 634 4008 or email sales@southern-comms.co.uk

Extremely easy to use thanks to its clear three-line display, ten pre-programmed system function keys and integrated voicemail management, the PCS 520 is a stylishly designed and fully featured terminal, offering a highlevel of maximiser specific functionality.

Paging to the desktop and personal auto-answer facilites are available, alongside a dual purpose Do Not Disturb/New Message LED indicator.

Enhanced Caller Display messages gives users a greater level of system information, whilst a combination of line power, supplemented by batteries, negates the need for an external power supply.

Splicecom Telephone Handsets Brochure pdf

PCS Operator Console Brochure pdf

Vision Live

The Vision Live wallboard allows Departmental and user performance to be monitored via multiple display panels. These include:

• Statistic & Panels
• Report Panels
• Web Panels

Configurable thresholds allow for Warnings and Alarms on individual variables. Colours user-defined for maximum flexibility.

Splicecom Vision brochure pdf
Splicecom Vision presentation pdf

Call Media

• Advanced routing and distribution
• Dynamic Prioritisation
• 1400+ Standard reports
• Web-based Wallboards
• Real-time management screens
• Open & published database for easy customised reporting
• Integrated Screen-popping and call control

With a simple IP user licence upgrade, you can convert your standard PCS-60 partner desktop application into a networked VoIP softphone.

Full control of all of your telephony functions is delivered via your computer network to your computer / laptop device.

All you need is a USB headset or handset to transform your computer into a VoIP telephone.

Communicate with the office and phone system users directly whenever you are connected to your network, in the office, working from home, or on the road.


Full Splicecom business phone system installation and project management service available.
Call 0845 634 4008 or email sales@southern-comms.co.uk

Splicecom maximiser brochure pdf

Seamless Multi-Site Integration of Splicecom Systems

For multi-site businesses, Splicecom Maxmiser's powerful location-independent architecture enables the deployment of a single Unified Communicationssystem that spans multiple locations, utilising IP Wide Area Network (WAN) links.

The ability to install a maximiser solution across geographically distributed sites allows your business to deliver constant and feature rich service to your customers and employees, totally independent of their location.

Small, simple, single-site or large, complex, multi-site network - it's all just a single system as far as maximiser's concerned. Constructed around just two modular components, Call Server and Phone Module, maximiser is very easy to put together. Exactly how you choose to do so will very much depend on exactly what you need it to deliver for your business.

Full Splicecom business phone system installation and project management service available.
Call 0845 634 4008 or email sales@southern-comms.co.uk

Just like maximiser’s wide range of Mobile & Homeworking solutions, there’s a choice of office mobility solutions to meet every business need, whatever the budget, area to be covered or number of employees. Voice over WiFi, IP DECT, standard DECT and GSM technologies can all be deployed to provide mobile maximiser extensions.

If WiFi is not available and voice mobility only is needed, costs for a voice grade WiFi infrastructure are likely to prove too expensive. In such scenarios, the useof IP DECT systems in conjunction with maximiser, such as those offered by Kirk Telecom, are likely to be the most cost-effective for large scale coverage and/or where a high density of mobile handsets are required.

Where a small number of users require voice mobility within a relatively small office standard analogue DECT phones can be connected to maximiser. As well as being extremely cost-effective, these DECT phones deliver CLI, Name and Called Number (depending on the size of display on the DECT Phone) when utilized with maximiser.

Mobile Remote Working gives mobile phone users access to the same facilities as a maximiser system phone. All system phone features are available by “pairing” the mobile with SpliceCom’s PCS 60 application on a laptop PC. This solution is great for homeworkers using existing DSL/VPN services. With the rise of Wireless based VPN services – this is also an ideal solution for the mobile workforce. All voice calls are carried across the GSM network, so the VPN service is only used for call control between the PCS 60 maximiser.

Remote Analogue Worker

Maximiser’s unique architecture allows the PCS 60 application to “partner” with the PCS 520 and PCS 505 business phones – or even existing analogue home phones. Voice calls are placed across the PSTN network, whilst call control and access to system features is achieved using the PCS 60 on a PC via any existing IP VPN/Remote Access data link; DSL, ISDN or even dial-up modem. Because of this QoS is not required on the datalink.

Splicecom Maximiser systems are able to integrate with 3rd-party SMS text gateways, or internet-hosted SMS bureaus. The functionality is part of the Splicecom Maximiser system and is included at no additional cost.

• Voicemail message alerts sent via sms for mobile staff
  
  
• Text to mobiles and directory contacts from the PC / desktop via the PCS-60 application.
  
  
• SMS Text replies delivered to the originator (subject to SMS provider)
  
  
• User-to-user free desktop text messaging

Full Splicecom business phone system installation and project management service available.
Call 0845 634 4008 or
email sales@southern-comms.co.uk

Lucent Alchemy Systems & Splicecom

Lucent Technologies originally acquired Network Alchemy as part of their incorporation of SDX, and they combined the two systems to enable INDeX owners to upgrade thier older PABX systems to the latest in convergence technology.

We are currently offering generous part-exchange discounts for Lucent Alchemy users who wish to upgrade to the Splicecom Maximiser system.

Call us on 0845 634 4008 or email sales@southern-comms.co.uk

The Lucent Alchemy was available in two variants:

Lucent ArgentOffice - for businesses with up to 100 extensions.

Lucent ArgentBranch - for businesses with up to 180 extensions.

Original Lucent Alchemy Brochure pdf

Full Splicecom installation, support and project management available.

Avaya 2030 / 2050 phone user guide pdf

Splicecom and Network Alchemy

Network Alchemy created the UK's first Convergence-biased telephone system, revolutionizing communications by giving users an easy-to-use application, which is still known and loved as Phonemanager more than a decade later.

We are currently offering generous part-exchange discounts for Lucent Alchemy users who wish to upgrade to the Splicecom Maximiser system.

Call us on 0845 634 4008
or email sales@southern-comms.co.uk

Network Alchemy changed the face of phone system design by incorporating traditionally "extra" features at no additional cost:

Integrated Voicemail with email integration
Integrated ISDN internet router
Integrated CTI - screen-popping Outlook
CTI user application - Phone Manager
System-to-system VoIP networking

The system also delivered caller-ID to analogue telephone handsets - a first for phone systems. The system was therefore available at a fraction of the cost of traditional PABX systems.

ArgentOffice - The original format released in 1997, designed for businesses with up to 100 extensions. ArgentBranch was added later for larger businesses with up to 180 extensions.

Original Network Alchemy Brochure pdf

Avaya INDeX

We are currently offering generous part-exchange discounts for SDX, Lucent and Avaya INDeX users who wish to upgrade to the Spliecom systems.

Call us on 0845 634 4008 or email sales@southern-comms.co.uk

INDeX owners were given the option to upgrade to Alchemy systems and Splicecom now offers the same opportunities for INDeX users with:

Integrated Voicemail with email integration
Integrated ISDN internet router
Integrated CTI - screen-popping Outlook
CTI user application - PCS-60
System-to-system VoIP networking

Install a new Splicecom system from us and enjoy a generous part-exchange discount for your existing INDeX system.

Good News for Analogue Phone Users!

Splicecom Maximiser systems support analogue telephones and faxes.

If you have an older PBX-type system and/or have analogue telephones in use, you can continue to use them with the Splicecom system whilst still taking advantage of the latest Telecoms technology.

Splicecom's PCS60 computer application takes the functionality requirement away from the telephone, meaning that a simple analogue device is often all that you need.

• Re-use your analogue phones
• Staff can use the PCS60 desktop application
• Lower phone system purchase costs
• Lower maintenance costs
• Less training required, easier transition
• Long term compatability - when phones are out of date, just buy the latest version.

Splicecom is the obvious choice for PBX users who are looking to upgrade and keep costs down.

Call us on 0845 634 4008
or email sales@southern-comms.co.uk